Vacuum tire repair tool

Tire repair is a professional job! If you don't know how to use it, you don't have the ability to do it. If you haven't used it before, don't buy it, so as not to waste it!

[Name]: Vacuum tire repair tool four-piece set
[Size]: 17cm × 11cm × 2cm or so
[Weight]: 0.3KG

[Number of boxes]: Please contact customer service.
[Packaging]: Plastic packaging
[Specifications]: 1 set (1 tire repair probe, 1 rubber strip pin)putOne 12g special glue for tire repair, 5 tire repair rubber strips, each strip is 10cm long)
[Applicable]: Vacuum tire repair for motorcycles, automobiles, etc
[Origin]: China

[How to use]:
1. Remove the nails from the tires.
2. Fill up the air first, and it is enough to be 80% full. It is not easy to enter if it is too full. Use a drill to drill the air leakage hole larger.
3. Place the rubber strip in the fork bit.
4. Exit the drill bit and insert the fork drill bit and the rubber strip into the air leakage port with force at the same time;
(If possible, find someone to hold the brakes so that the tires don't roll, even better.)
5. Then pull out the fork drill bit and leave a rubber strip to seal the air leakage port;
6. Then use a blade to cut off the excess tape.
7. Finally fill up the air, and then check whether the tire is leaking. You're done.

Note: It is necessary to make sure that the cold patch penetrates the tire to avoid slipping out after inflation