Car battery firing wire, battery wire

[Product name]: Battery cable

[Product description]:

Don't worry when your car can't get started because there is no power. Take a taxi from the side of the road and get it easily with a clip at both ends. Cars rarely run out of power, but once in a while, it can really make people anxious. Don't be afraid of 10,000, just in case, it's better to bring a battery clip. No worries.

[Product specifications]: 100A, 200A, 300A, 400A, 500A, 600A, 1000A, etc

[Product material]: PP

[Product single weight]: set battery cable 0.5KG

                    500A battery cable 0.7KG(Net weight: 590g)

1000A battery line 1.2KG (net weight: 1.05kg)

1000A4 meters A 2.8KG (net weight: 2.68kg)

[Product size]: Line length 2 meters/1000A type A 4 meters long

[Number of product boxes]: 1000A (20 sets/box) 1000A4 meters (10 sets/box)

 [Packing size]: 1000A (55 * 26 * 44cm) 1000A4 meters (58 * 29 * 31cm)

Product size

  

[Product packaging]: Foreign trade export packaging

[Instructions for use]:

First, the connection procedure is as follows:
(1) First, place the red wire clamp of the starting wire on the red battery of the rescued car.

(2) Then clamp the red wire at the other end against the red battery of the rescue vehicle.

(3) Clamp the black wires onto the black negative comparison battery of the rescued vehicle.

(4) Then clamp the black wires onto the black negative comparison battery of the rescue vehicle.

(5) Start the engine of the "rescue vehicle" first, and then start the engine of the "rescued vehicle". If it is found that the rescued vehicle still cannot be started,

Please check whether the metal contact part is in poor contact.

Attention: After starting the engine, it is still necessary to remove the starting wire in sequence, otherwise it may cause a short circuit.

Second, the procedure for removing wires is as follows:

(1) First remove the black wires of the "rescued car".

(2) Remove the black wires of the "rescue vehicle".

(3) Then remove the red wires of the "rescue vehicle".

(4) Finally, remove the red wires of the "rescued car".

This 500A battery line is packaged for foreign trade export.

[Precautions]:

1. When the car cannot be started without electricity, it can be started by the battery of another vehicle. Bold battery start cable,

The maximum passing current is 500AMP, generally suitable for gasoline engines with a displacement of less than 2500cc or within 2000cc

The diesel engine is used between batteries.

2. The two cars cannot have any contact, and the electronic systems of the two cars must have the same voltage. If the battery freezes, please do not

Use this startup cable.

3. Before connecting, the engines, stereos, and air conditioners of both vehicles need to be turned off.